The Network Security Key Isn't Correct

A wireless connection is a approving, but sometimes you may face errors while connecting to ane. This tutorial will address i such error and testify y'all how to fix the Network Security Key Mismatch error on Windows 11 computers. This consequence can be hands stock-still, and there are different means you tin attempt and fix the problem, and you lot can see which one works for you.

Fix Network Security Fundamental Mismatch Mistake

This fault occurs when y'all try to connect to a Wi-Fi connexion. At that place is a possibility that you recently changed the security type similar WPA, WPA2, WEP, etc. Changing the security may be causing this mistake, then y'all cannot connect to the network you used to.

Prepare Network Security Key Mismatch Error Past Restarting

This is the thing that every ane of the states does when facing a connectivity effect. This is the first step that very often fixes any error you may be facing. If the router cannot update the security change automatically, you may get this error. Restart your router and see if it fixes the problem.
I suggest restarting your PC too while your router connects.

Forget Network

If the restarting didn't fix the issue, you could always forget the network you are trying to connect to and and then connect again by calculation the password details. At that place are dissimilar ways y'all tin do this on Windows 11, only I volition bear witness you the fastest manner to Forget a network and and so sign in again.

Step-1: On your desktop taskbar, click on the Wifi icon. (You will observe that unlike Windows 10, you can no longer click on the icon alone. You lot will exist selecting two other icons with it besides.)

Step-2: When the flyout opens, click on the Wifi icon.

Pace-iii: Right-click on the Wifi connexion y'all are trying to connect to and select Forget.

Footstep-4: At present follow steps ane-2 over again.

Step-5: Click on the connection you desire to connect and select Connect.

Footstep-6: Enter the Security cardinal and click Next.

Fix Network Security Cardinal Mismatch Error past Resetting TCP/IP

You lot may have to release and renew TCP/IP to gear up the issue. Before doing this, make sure you lot create a organisation restore point.

Footstep-one: Click on the search icon on the taskbar and blazon cmd.

Step-2: Select Run equally administrator.

Step-3: You will be asked, exercise you lot want to allow this app to make changes to your device? Select Aye.

Pace-four: Type the following command and press Enter:

netsh int ip reset

This will reset the IP
Bonus:

If yous want a log file, every bit well as an IP, reset, use the following command and press Enter:

netsh int ip reset resettcpip.txt

If you utilise an IPv4, use this command and printing Enter:

netsh int ipv4 reset

If you lot use IPv6, employ the post-obit control and printing Enter:

netsh int ipv6 reset

Reset Network Settings

You can reset your network settings equally well:

1.  Click on the Windows icon on the taskbar and click on the Settings cog.
   
2. Click on Network & Internet in the left pane.
   
3. Select Advanced Network Settings pick.
   
4. Click on the Network Reset option.
   
5. Select Reset Now.
   
6. Click on Yep for confirmation.
   

Revert Router Settings

If this error was caused after you changed the security settings, I advise going back to your original settings. This can also resolve the error if none of the in a higher place-mentioned methods worked.

I hope this helps, and the network security key mismatch error was resolved. If y'all tried another method, let usa know in the comments below.

Source: https://wccftech.com/how-to/how-to-fix-the-network-security-key-mismatch-error-on-windows-11-computers/

Share this post